Our Products & Systems
Cellecta products enable designers and purchasers to solve their acoustic and thermal insulation problems with cost effective constructions that satisfy the requirements of Approved documents L1, L2 & E (England and Wales) and sections 3 & 5 (Scotland) of the building regulations.
​
Filter by:
Rubber support strip for doorways.
Compatible with ScreedBoard 28, 20, Fibrefon 8, DECKfon 17T, 26T and 30T
8mm x 75mm x 1m
Composite acoustic overlay floorboard
17mm board thickness
Over 200,000m² installed
Excellent acoustic performance
Composite acoustic overlay floorboard
26mm board thickness
Over 1 million m² installed
Ideal for conversion & refurb projects
Composite acoustic overlay floorboard
30mm board thickness
Over 400,000m² installed
T&G edge detail and moisture resistant
Composite acoustic overlay floorboard
37mm board thickness
Over 200,000m² installed
Quick and easy to install
Resilient composite shallow batten
Excellent acoustic performance
Suitable for all types of separating floors
FSC®/PEFC® certified timber batten
Resilient composite deep batten
Excellent acoustic performance
Robust Detail FFT1 compliant
FSC®/PEFC® certified timber batten
Direct to joist, four layer acoustic floorboard
Ideal for conversion & refurb projects
Excellent acoustic performance
T&G edge detail and moisture resistant
High density composite acoustic mat
Only 15mm thick
Ideal for conversion & refurb projects
Excellent acoustic performance
Composite acoustic overlay floorboard
12mm board thickness
3mm polyester fleece layer
9mm T&G MDF facing board
Composite acoustic overlay floorboard
21mm board thickness
3mm polyester fleece layer
18mm P5 T&G chipboard
Composite acoustic overlay floorboard
28mm board thickness
Ideal for new build and refurb projects
T&G edge detail and moisture resistant
Ultimate performance acoustic layer for timber & steel joist floors
8mm thick
Outstanding impact reduction
For timber and steel joisted floors
Routed, wood fibre UFH & acoustic floorboard
UFH board with superior acoustic properties
Made from recycled/recyclable wood fibre
Manufactured to suit pipe diameter
Non-itch, sound absorption sheet
15mm thickness
Suitable for partition and ceiling voids
Non-itch polyester fibres
Non-itch, sound absorption sheet
Outstanding sound absorbency
Suitable for partition and ceiling voids
Non-itch polyester fibres
Highly conductive, interlocking T & G floorboard
Excellent airborne sound absorption
Thin treatment, only 18 mm thick
Impact resistant, high density gypsum facing
High density acoustic overlay board for separating floors
Robust Detail treatment FFT4 compliant
Suitable for steel/ concrete & concrete floors
Accepts a multitude of floor finishes
Highly conductive structural floorboard
25mm board
Recycled high quality gypsum
3x more thermally conductive than chipboard
Highly conductive structural floorboard
28mm board
Recycled high quality gypsum
3x more thermally conductive than chipboard
Highly conductive structural floorboard
30mm board
Recycled high quality gypsum
3x more thermally conductive than chipboard
High density acoustic composite wall boards
Excellent airborne sound absorption
Thin treatment, only 28mm thick
Impact resistant, high density gypsum facing
High density acoustic composite wall boards
Outstanding acoustic performance
Overall treatment only 45mm thick (30mm + 15mm)
Specifically for lining masonry walls with timber joist separating floor
High impact polypropylene acoustic cradle
Excellent acoustic performance
Robust detail FFT2 compliant
Levels all types of uneven floors
High density re-bonded rubber crumb resilient layer
3mm thickness
Suitable for all types of concrete floors
Low profile resilient layer
.png)
High density re-bonded rubber crumb resilient layer
5mm thickness
Suitable for all types of concrete floors
Suitable for high load applications
High density re-bonded rubber crumb resilient layer
6mm thickness
Suitable for all types of concrete floors
Proprietary Robust Detail E-FC-18*& 19*
.png)
High density re-bonded rubber crumb resilient layer
8mm thickness
Suitable for all types of concrete floors
Superior compressive strength
High density re-bonded rubber and cork crumb resilient floor covering
3mm thickness
Compatible with all types of floor finish
Excellent impact reduction
High density re-bonded rubber and cork crumb resilient floor covering
5mm thickness
Compatible with all types of floor finish
Robust Detail E-FC-18 compliant
Highly conductive, interlocking floorboard
20mm thick board
3x more thermally conductive than chipboard
Robust Detail E-FS-3, E-FT-5 & 6 proprietary overlay board & FFT4 compliant
High density composite acoustic overlay floorboard
28mm thick board
Suitable for steel, concrete and timber floors
Robust Detail proprietary treatment: E-FT-5, E-FT-6, E-FS-3 & FFT4 compliant
High density composite acoustic overlay floorboard
Compatible with all types of concrete floors
Robust Detail FFT4 compliant acoustic treatment
Interlocking edge detail
Rigid insulated cavity closers
2 rigid U-PVC DPC profiles
Eliminates thermal bridging around window and door openings
High performance closed-cell core
Rigid insulated cavity closers
1 rigid U-PVC DPC profile
Eliminates thermal bridging around window and door openings
High performance closed-cell core
High performance under screed acoustic foam
Superior impact sound deadening proper
Suitable for all types of concrete floors & screeds
Supplied as a kit with edge strip and join
Closed-cell polyethylene acoustic foam
High impact sound deadening proper
Thin solution - only 5mm thick
Suitable for all types of concrete floors
Chipboard/extruded polystyrene thermal laminate
P5 Chipboard facing with tongue & groove interlocking edge profile
High compressive strength insulation
Excellent life-long thermal performance
High impact cementitious faced CO2 blown extruded polystyrene
6mm smooth Class O facing
High impact resistance
Available in two colours: white and grey
.png)
CO2 blown extruded polystyrene
Integral multi directional drainage channels
Very low water absorption <0.7%
Excellent life-long thermal performance
_edited.png)
CO2 blown extruded polystyrene
250kPa - 2x stronger than PiR insulation
Suitable for residential and commercial applications
Can be installed above or below the DPM
CO2 blown extruded polystyrene
300kPa - 2.5 stronger than PiR insulation
Suitable for residential and commercial applications
Can be installed above or below the DPM
CO2 blown extruded polystyrene
500kPa - 4x stronger than PiR insulation
Suitable for residential, commercial & industrial applications
Can be installed above or below the DPM
CO2 blown extruded polystyrene
700kPa - 5x stronger than PiR insulation
Suitable for residential, commercial & industrial applications
Can be installed above or below the DPM
CO2 extruded polystyrene with a plasterboard facing
Available with square and tapered edge plasterboard
Excellent life-long thermal performance
100% Recyclable thermal layer
.png)
High impact cementitious faced CO2 blown extruded polystyrene
High impact grey cementitious facing
Excellent life-long thermal performance
Quick and easy to install
CO2 blown extruded polystyrene
Ideal for external, below ground applications
Very low water absorption <0.7%
Excellent life-long thermal performance
CO2 blown extruded polystyrene
Extra high compressive strength - 500kPa
Very low water absorption <0.7%
Excellent life-long thermal performance
Close tolerance CO2 blown extruded polystyrene
Close tolerance thickness (+/- 0.5mm)
Ideal for applications where a flat even base is required
300kPa - 2.5x stronger than PiR insulation
.png)
CO2 blown extruded polystyrene
High compressive strength - 300kPa
Very low water absorption <0.7%
Excellent life-long thermal performance
CO2 blown extruded polystyrene
Extra high compressive strength - 500kPa
Ideal for high imposed load applications
Shiplap edge profile
CO2 blown extruded polystyrene UFH board
High compressive strength XPS (250kPa)
Manufactured to suit pipe diameter
Mojave M1 component
CO2 blown extruded polystyrene UFH board
High compressive strength XPS (300kPa)
Manufactured to suit pipe diameter
Mojave M1 component
CO2 blown extruded polystyrene UFH board
High compressive strength XPS (500kPa)
Ideal for new build and refurbishment projects
Mojave M1 component
Fully foil faced, CO2 blown extruded polystyrene UFH board
High compressive strength XPS (250kPa)
Mojave M3 component
Wide range of thicknesses available
Fully foil faced, CO2 blown extruded polystyrene UFH board
High compressive strength XPS (300kPa)
Fully foil faced for improved heat diffusion
Mojave M3 component
Fully foil faced, CO2 blown extruded polystyrene UFH board
High compressive strength XPS (500kPa)
Wide range of thicknesses available
Ideal for new build and refurbishment projects
Fully foil faced, including into the channels CO2 blown extruded polystyrene UFH board
High compressive strength XPS (250kPa)
Mojave M2 component
Wide range of thicknesses available
Fully foil faced, including into the channels CO2 blown extruded polystyrene UFH board
High compressive strength XPS (300kPa)
Fully foil faced for superior heat diffusion
Mojave M2 component
Fully foil faced, including into the channels CO2 blown extruded polystyrene UFH board
High compressive strength XPS (500kPa)
Wide range of thicknesses available
Ideal for new build and refurbishment projects
CO2 blown extruded polystyrene
Excellent thermal performance
Fits between timber joists or acoustic battens
Manufactured to suit pipe and spacing required
Foil faced, CO2 blown extruded polystyrene UFH board
Foil faced for improved heat diffusion
Fits between timber joists or acoustic battens
Manufactured to suit pipe diameter & centres
CO2 blown extruded polystyrene UFH board
Low profile board (15-25mm)
Extra high compressive strength XPS (400kPa)
Manufactured to suit pipe diameter
Foil faced for improved heat diffusion
Foil faced for superior response times
Low profile board (15-25mm)
Extra high 400kPa compressive strength
Tiling membrane faced, CO2 blown extruded polystyrene UFH board
Low profile board (15-25mm)
Extra high compressive strength XPS (400kPa)
Manufactured to suit pipe diameter & centres
Insulation board with integrated fully foil lined channels and tile membrane
Delivers superior dispersion of heat
Low profile board (15-25mm)
Manufactured to suit pipe diameter & centres
.png)
High conductivity overlay board for CHiPFLO board
Promotes rapid heat transfer
High impact resistance
Accepts a multitude of floor finishes
%20.png)
Foil faced, routed structural UFH T&G floorboard
Low profile, structural UFH floorboard
Foil faced to promote rapid heat transfer
Manufactured to suit pipe diameter
Routed structural UFH T&G floorboard
Low profile solution for timber joist floors
Third party structurally tested
Manufactured to suit pipe diameter
Structural T&G floorboard with straight channels routed into the board to accept UFH pipe
Low profile, structural UFH floorboard
Supplied with straight channels at 150 or 200mm centres routed into the board to suit pipe diameter
Pipe return board also available
Low profile, screed encasement UFH pipe carrier panel
Only 15mm thick
Quick and easy to install
Self adhesive backing
Low profile, screed encasement UFH pipe carrier panel with integral thermal barrier
Offered in three depths: 18, 21, 25mm
Integral thermal barrier
Quick and easy to install
Low profile, screed encasement UFH pipe carrier panel
Only 20mm thick
Accepts 14-17mm pipe
Ideal for new build, refurbishment & conversion UFH applications
Low profile, screed encasement UFH pipe carrier panel with integral thermal barrier
Offered in three depths: 18, 21, 25mm
Integral thermal barrier
Quick and easy to install
Low profile, screed encasement UFH pipe carrier panel with integral thermal barrier
Offered in three depths: 18, 21, 25mm
Integral thermal barrier
Quick and easy to install
Cradle and batten acoustic levelling systems with integrated underfloor heating
Outstanding acoustic performance - Robust Detail FFT2 compliant
Levels all types of separating floors
25mm low-deflection board promotes rapid heat transfer
Cradle and batten acoustic levelling systems with integrated underfloor heating
Outstanding acoustic performance - Robust Detail FFT2 compliant
Levels all types of separating floors
28mm low-deflection board promotes rapid heat transfer
Cradle and batten acoustic levelling systems with integrated underfloor heating
Resilient acoustic cradle and batten system for impact sound reduction
Levels all types of separating floors
30mm low-deflection board promotes rapid heat transfer
Cradle and batten acoustic levelling systems with integrated underfloor heating
Resilient acoustic cradle and batten system for impact sound reduction
Levels all types of separating floors
25mm low-deflection board promotes quick heat transfer
Cradle and batten acoustic levelling systems with integrated underfloor heating
Resilient acoustic cradle and batten system for impact sound reduction
Levels all types of separating floors
28mm low-deflection board promotes quick heat transfer
Cradle and batten acoustic levelling systems with integrated underfloor heating
Resilient acoustic cradle and batten system for impact sound reduction
Levels all types of separating floors
30mm low-deflection board promotes quick heat transfer
Mojave M1-10 is a high performance UFH & acoustic system for concrete floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M1-3 is a high performance UFH & acoustic system for low-profile concrete floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M1-8 is a high performance UFH & acoustic system for lightweight floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M2-10 is a high performance UFH & acoustic system for concrete floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M2-3 is a high performance UFH & acoustic system for low-profile concrete floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M2-8 is a high performance UFH & acoustic system for lightweight floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M3-10 is a high performance UFH & acoustic system for concrete floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Mojave M3-3 is a high performance UFH & acoustic system for low-profile concrete floors
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build