Our Installation Guides List
Cellecta products enable designers and purchasers to solve their acoustic and thermal insulation problems with cost effective constructions that satisfy the requirements of Approved documents L1, L2 & E (England and Wales) and sections 3 & 5 (Scotland) of the building regulations.
DECKfon 17T is the ideal shallow composite overlay board for improving the acoustic performance of a structural timber floor. The unique treatment combines a tongue & groove timber floorboard with a low resonance, flexible resilient foam.
DECKfon 26T is the UK's No. 1 composite overlays are the ideal acoustic treatment to improve the performance of an existing structural timber decked floor. All three treatments combine a tongue and groove timber floorboard with a low resonance, flexible resilient foam.
DECKfon 30T composite overlays are the ideal acoustic treatment to improve the performance of a structural timber floor. The unique treatment combines a 22mm BBA approved, P5 tongue and groove timber floorboard with a recycled, flexible resilient foam.
DECKfon acoustic battens consist of a layer of recycled, low resonance, open-cell, flexible polyurethane foam bonded to a timber batten. They have been rigorously tested, and are Robust Detail compliant for steel/concrete & concrete separating floor applications (FFT3).
DECKfon acoustic battens consist of a layer of recycled, low resonance, open-cell, flexible polyurethane foam bonded to a timber batten. They have been rigorously tested, and are Robust Detail compliant for steel, concrete & timber separating floor applications (FFT1).
DECKfon Quattro 39 structural acoustic composite floorboards are designed to be laid on timber joist floors where the ceiling below is not replaced. The unique four layer make-up consists of a P5 T&G chipboard and two resilient layers isolated by a high density MDF sheet that delivers outstanding sound proofing performance.
DECKfon ULTRAmat 15 is a high performance, three layer composite mat that will improve both the impact and airborne performance of a floor where there is limited room height available. Once laid, the mat can be covered with carpet or suitable wooden flooring.
DECKfon ULTRAmat 15 is a high performance, three layer composite mat that will improve both the impact and airborne performance of a floor where there is limited room height available. Once laid, the mat can be covered with carpet or suitable wooden flooring.
FIBREfon shallow platform floating floor treatments are Robust Detail FFT5 compliant, with their acoustic performance third party tested. Three thickness' are available to provide design flexibility, with each one combining a tongue and groove timber floorboard with a high compressive strength resilient layer.
FIBREfon shallow platform floating floor treatments are Robust Detail FFT5 compliant, with their acoustic performance third party tested. Three thickness' are available to provide design flexibility, with each one combining a tongue and groove timber floorboard with a high compressive strength resilient layer.
FIBREfon shallow platform floating floor treatments are Robust Detail FFT5 compliant, with their acoustic performance third party tested. Three thickness' are available to provide design flexibility, with each one combining a tongue and groove timber floorboard with a high compressive strength resilient layer.
FIBREfon shallow platform floating floor treatments are Robust Detail FFT5 compliant, with their acoustic performance third party tested. Three thickness' are available to provide design flexibility, with each one combining a tongue and groove timber floorboard with a high compressive strength resilient layer.
Gobi compliant acoustic levelling systems incorporate RUBBERfon cradles, HiDECK Structural 25 heat conductive floorboards and XFLO JB routed insulation boards, and Cellecta ULTRAplate to produce a floor with outstanding acoustic properties, rapid heating response times and energy efficiency at a low flow temperature. In addition, Gobi systems can directly accept brittle floor finishes, such as ceramic tiles, providing aesthetic design flexibility.
HiDECK Acoustic Overlay 28 flooring treatment’s high density and superior compressive strength resilient layer provide outstanding levels of acoustic performance, exceeding legislative requirements. The board has a T&G edge profile and easy screw-free installation.
HiDECK Overlay 18 is ideal for flooring applications incorporating an underflooring heating system due to its high thermal conductivity which provides rapid reaction times, saving on running costs. In addition, its high density makes it perfect for a variety of acoustic applications.
Mojave M1-10 is an award winning, dry laid underfloor heating system specifically designed for level concrete floors and high-load applications, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, ULTRAplate aluminium diffusion plate, XFLO high compressive insulation boards, and FIBREfon 10 to ensure compliance with Building Regulations Part E legislation.
Mojave M1-3 is an award winning, dry laid underfloor heating system specifically designed for low-profile or high-load applications, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, ULTRAplate aluminium diffusion plate, XFLO high compressive insulation boards, and RIBBERfon 3 to ensure compliance with Building Regulations Part E legislation.
Mojave M1-8 is an award winning, dry laid underfloor heating system specifically designed for timber and steel joists, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, ULTRAplate aluminium diffusion plate, XFLO high compressive insulation boards, and FIBREfon 8 to ensure compliance with Building Regulations Part E legislation.
Mojave M2-10 is an award winning, dry laid underfloor heating system specifically designed for level concrete floors and high-load applications, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, XFLO FF+ fully foil faced, high compressive insulation boards, and FIBREfon 10 to ensure compliance with Building Regulations Part E legislation.
Mojave M2-3 is an award winning, dry laid underfloor heating system specifically designed for low-profile or high-load applications, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, XFLO FF+ fully foil faced, high compressive insulation boards, and RUBBERfon 3 to ensure compliance with Building Regulations Part E legislation.
Mojave M1-8 is an award winning, dry laid underfloor heating system specifically designed for timber and steel joists, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, XFLO FF+ fully foil faced high compressive insulation boards, and FIBREfon 8 to ensure compliance with Building Regulations Part E legislation.
ScreedBoard 28 is an award winning composite acoustic overlay treatment, featuring interlocking edges for installation convenience. The boards have a high density and unique resilient layer providing unrivalled acoustic performance, typically 5dB better than legislative requirements.
ScreedBoard 30 composite acoustic overlay treatment specifically for concrete separating floors. The board’s high density and superior compressive strength resilient layer provides outstanding acoustic performance and an ideal base to accept a multitude of floor finishes.
YELOfon HD10+ is an acclaimed resilient layer system that carries 3 proprietary Robust Details: E-FC-5, 17 & 18. The system is lightweight, easy to install and delivers unrivalled acoustic performance when used to isolate a floating screed from a structural concrete floor.