Ultimate performance acoustic layer for timber & steel joist floors
To ensure a Mojave underfloor heating system complies with acoustic performance standards Cellecta offers three resilient layers - FIBREfon 8 is utilised on timber and metal joist floor applications or where superior sound performance is required.
Related products
YELOfon ES5
ScreedBoard® 20
XFLO FF 250
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
FIBREfon 8
Product description
Ultimate performance acoustic layer for timber & steel joist floors
Composition
70% recycled polyester rebonded rubber
Thickness
10mm
Roll / sheet dimensions
1 x 15m (15m²)
Thermal conductivity (W/mK)
0.032
Weight (roll/sheet)
1.00kg/lm, 0.72kg/length
Minimum order quantity
1 sheet
Robust Detail compliance
FFT4 (E-FS-1, E-FC-1 & E-FC-2) E-FS-3, E-FS-5, E-FS-6
.png)
8mm thick
.png)
For concrete floors
Woodfibre board
.png)
Downloads
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.