High impact cementitious faced CO2 blown extruded polystyrene
XCPL combines the benefits of a high-performance HEXATHERM extruded polystyrene with a Class O, high-impact facing board to produce an attractive composite thermal lining board, ideal for the car park and soffit lining applications.
Related products
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
HEXATHERM XCPL
Product description
High impact cementitious CO₂ blown extruded polystyrene
Thermal conductivity (W/mK)
0.033 ≤ 80mm, 0.034 ≥ 81mm
Strength at 10% compression (kPa)
300
Strength at 2% compression (kPa)
125
Long term water absorption by immersion
<0.7%
Edge profile
Square
Board size (mm)
1200 x 2400
Thickness (mm)
106, 126, 146, 166
6mm smooth Class O facing
High impact resistance
Available in two colours: white and grey
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.