Fully foil faced, including into the channels CO2 blown extruded polystyrene UFH board
XFLO FF+ 500 underfloor heating insulation boards have a high compressive strength and aluminium foil facing for added thermal diffusion. The boards are manufactured to suit the pipe diameter and spacing required and once covered with ScreedBoard 20 provide a responsive heating solution for domestic and commercial applications.
Related products
YELOfon ES5
ScreedBoard® 20
FIBREfon 8
FIBREfon 10
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
XFLO FF+ 500
Product description
Fully foiled faced, including into the channels CO2 blown extruded polystyrene UFH board
Strength at 10% compression (kPa)
500
Thermal conductivity W/mK
0.033
Standard thickness (mm)
50, 60
Board sizes (mm)
600 x 1250
Route sizes available to suit UFH pipe diameter (mm)
10, 12, 15, 16
Pipe centre options
150, 200, 300
Return style options
Arch (default), Tulip
Minimum order quantity
1 board
Associated thermal perimeter edge strip required
Cellecta Thermal Edge Roll
High compressive strength XPS (500kPa)
Wide range of thicknesses available
Ideal for new build and refurbishment projects
Downloads
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.