Mojave M1-10 is a high performance UFH & acoustic system for concrete floors, offering rapid thermal response and ultimate efficiency at low flow temperatures
Mojave M1-10 is an award winning, dry laid underfloor heating system specifically designed for level concrete floors and high-load applications, delivering unrivalled thermal response times, and provide market leading acoustic performance. Each system comprises of ScreedBoard 20 high conductivity overlay board, ULTRAplate aluminium diffusion plate, XFLO high compressive insulation boards, and FIBREfon 10 to ensure compliance with Building Regulations Part E legislation.
Related products
YELOfon ES5
ScreedBoard® 20
XFLO 250
ULTRAplate 1i
FIBREfon 8
FIBREfon 10
ScreedBoard® Fixing Batten
ScreedBoard Pull Bar
Cellecta PRO Adhesive
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Rapid heat response times
Performs at a low flow temperature
Dry installation, no added moisture to build
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.