Pressed aluminium heat diffusion plate
ULTRAplates are made from highly conductive aluminium. Plates are manufactured to suit the specific application, diameter of pipe and spacing required. When inserted into an XFLO insulation board they provide outstanding homogenous transfer heat performance through to the floor’s surface.
Related products
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
ULTRAplate 1i
Product description
Pressed aluminium heat diffusion plate
Aluminium plate thickness
0.5mm
Number of impressions
1
Plate dimensions
130 x 100
Pipe diameter options
10, 12, 15, 16, 20
Made from high quality aluminium
Increases the efficiency of UFH system
Manufactures to suit the pipe diameter
Downloads
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.