Low profile, screed encasement UFH pipe carrier panel with integral thermal barrier
CLiCKFLO X ultra low profile, high impact plastic, pipe retention panels securely hold the heating pipe in place, eliminating the need for seperate fasteners. The panel's unique moulded pattern ensures consistent pipe spacing whilst the HEXATHERM thermal barrier bonded to the underside, promotes upward thermal conduction. Once covered with a self-levelling screed the UFH system delivers rapid response times.
Related products
.png)
RUBBERfon Impact 5
RUBBERfon Impact 6
.png)
RUBBERfon Impact 8
Cellecta HB724 Adhesive
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
CLiCKFLO 21X
Product description
Low profile, screed encasement UFH pipe carrier panel with integral thermal barrier
Composition
100% recycled polypropylene + CO₂ blown XPS
Panel dimensions (mm)
21 (15+6*) x 600 x 600
Thermal barrier (XPS*) resistance (kg/m²)
0.176
Weight
3.89kg/m², 1.40kg/panel
Panel coverage (m²)
0.36
Minimum order quantity
1 panel
Associated thermal perimeter edge strip required
Thermal Edge Roll+ 5/75
Offered in three depths: 18, 21, 25mm
Integral thermal barrier
Quick and easy to install
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.