High performance resilience bars
HP30 deep resilient bars virtually decouple the ceiling from the floor joists and deliver superior acoustic performance over standard resilient bars. The bar’s double-fixing flanges allow high-mass plasterboards to be installed, often eliminating the need for a secondary ceiling treatment.
Related products
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
HP30 Resilient Bar
Product description
High performance double flange resilient bar
Depth
30mm
Length
2400mm
Number of fixing flanges
2
Max hanging weight: (joists at 450mm centres)
59kg/m² at 450mm centres, 48kg/m² at 600mm centres
Max hanging weight: (joists at 600mm centres)
48kg/m² at 450mm centres
36kg/m² at 600mm centres
Associated flanking/edge strips required
Cellecta C-strip
Superior acoustic performance and hanging capabilities than standard resilient bars
Robust Detail proprietary component for E-FS-3, E-FT-5 & E-FT-6
Reduces risk of screws causing acoustic bridging
Downloads
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.