CO2 blown extruded polystyrene
XPOOL insulation boards have an ultra-high resistance to compression, are able to withstand long-term high static loads, extremely low water absorption and outstanding thermal performance, providing long-term energy savings.
Related products
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
HEXATHERM XPOOL
Product description
CO₂ blown extruded polystyrene
Thermal conductivity (W/mK)
0.035
Strength at 10% compression (kPa)
500
Strength at 2% compression (kPa)
180
Long term water absorption by immersion
<0.7%
Edge profile
Shiplap
Board size (mm)
600 x 1250
Thickness (mm)
50, 60, 75, 80, 90, 100, 120, 140, 160
Extra high compressive strength - 500kPa
Very low water absorption <0.7%
Excellent life-long thermal performance
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.