Cradle and batten acoustic levelling systems with integrated underfloor heating
Gobi compliant acoustic levelling systems incorporate RUBBERfon cradles, HiDECK Structural 28 heat conductive floorboards and foil faced XFLO JB FF routed insulation boards to produce a floor with outstanding acoustic properties, rapid heating response times and energy efficiency at a low flow temperature. In addition, Gobi systems can directly accept brittle floor finishes, such as ceramic tiles, providing aesthetic design flexibility.
Related products
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Product Description
Brand Name
Resilient acoustic cradle and batten system for impact sound reduction
Levels all types of separating floors
28mm low-deflection board promotes quick heat transfer
Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.