Low profile, screed encasement UFH pipe carrier panel
CLiCKFLO 20 low profile, high impact plastic, pipe retention panels securely hold the heating pipe in place, eliminating the need for seperate fasteners. The panel's unique moulded pattern ensures consistent pipe spacing and alignment. The panels have a self adhesive backing, enabling them to be stuck to the sub-floor. Once covered with a self-levelling screed the system delivers outstanding heating performance.
Architect and specifier resources
Third Party Accreditation and Approvals
Specifications
Brand name
CLiCKFLO 20
Product description
Low profile, screed encasement UFH pipe carrier panel
Composition
100% recycled polypropylene
Panel dimensions (mm)
20 x 600 x 600 (0.72m²)
Weight
1.61kg/m², 1.16kg/panel
Quantity per pack
3.60m², 10 panels
Minimum order quantity
1 pack
Associated thermal perimeter edge strip required
Thermal Edge Roll+ 5+/75


Only 20mm thick

Accepts 14-17mm pipe
Ideal for new build, refurbishment & conversion UFH applications

Robust Detail and Proprietary applications
Handling and Storage
Store inside
This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.
It can only be stored in a single lift, do not double stack.
If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.
Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.
Product protection
This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.
Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.





