top of page
  • Instagram
  • Facebook
  • X
  • LinkedIn
  • Youtube

Open Mon - Fri 08:30 - 17:00

Tiling membrane faced, CO2 blown extruded polystyrene UFH board

XFLO Tiling Board boards are a patent pending, low profile, routed under floor heating insulation board with a unique facing membrane, that enables floor tiles to be directly adhered. The board’s ultra high compressive strength enables it to withstand the rigours of both domestic and commercial applications.

Related products

YELOfon-ES10.jpg

Cellecta HB724 Adhesive

YELOfon-ES10.jpg

YELOfon-ES10.jpg

YELOfon-ES10.jpg

YELOfon-ES10.jpg

YELOfon-ES10.jpg

YELOfon-ES10.jpg

YELOfon-ES10.jpg

Architect and specifier resources

Third Party Accreditation and Approvals

UK CA
ISO 14001
ISO 9001

Interested in this product?

Specifications

Brand name

XFLO TB

Product description

Tiling membrane faced, CO₂ blown extruded polystyrene UFH board

Strength at 10% compression (kPa)

400

Facing (top side)

Glass reinforcement tiling mesh

Standard thickness (mm)

15, 18, 20, 25

Board sizes (mm)

600 x 1250

Route sizes available to suit UFH pipe diameter (mm)

10, 12, 15, 16

Pipe centre options

150, 200, 300

Return style options

Arch (default), Tulip

Minimum order quantity

1 board

4 - Edited.png
Low profile board (15-25mm)

Low profile board (15-25mm)

Screedboard 28 Cam6 MR.webp

Extra high compressive strength XPS (400kPa)

Manufactured to suit pipe diameter & centres

Screedboard 28 Cam6 MR.webp

Downloads

Robust Detail and Proprietary applications

Handling and Storage

Store inside


This product should be stored inside on a pallet in water-tight conditions on a dry, flat and level base.


It can only be stored in a single lift, do not double stack.


If you are required to re-stack the product, we advise that the boards are stored on a pallet or are fully supported from the underside.


Care should be taken not to damage the edges of the board whilst re-stacking. The stacking of the product on it's edges should be avoided, as this can lead to damage.


Product protection


This product is supplied on pallets, wrapped in temporary protection. This covering is to offer dust protection and is a temporary measure to protect the boards from the weather during the loading/unloading process, it is not a waterproof cover and should be stored inside.


Adhesives and primers need to be protected from frost damage. They should be stored & used at temperatures between 5°C and 35°C and kept out of direct sunlight.

Indoor Water-tight
bottom of page